Design Step
Design Step
The design step allows adding specific operations to your part.
The Design Step
The design step is where you can add two specific operations to your part: bending and engraving. These operations are only available when eligible for the chosen material.
Specific Operations
Depending on the previously selected material, you can add bending operations (for metals) and engraving (laser or mechanical).
Automatic Detection
If a bend line was identified when importing your drawing, it will automatically appear in an element list for processing.
Four Processing Options
For each detected line, you have four possible choices: ignore the line, cut it, bend it or engrave it. Depending on chosen option, we will execute the corresponding operation on your part.
Bend Parameters
For bending, we also ask you to specify the bend angle and direction (up or down) for precise execution.
Identify Elements to Engrave
If you want to select elements to engrave, choose Identify element to engrave tab and select the different shapes you want to engrave instead of cut.
Multiple Selection
Select all elements you wish to engrave. Each selected shape will be processed according to the engraving type you chose.
Engraved Elements Visualization
When shapes are selected, they will appear in the viewer in cyan or blue color, depending on chosen engraving type. This allows you to visually verify your selection before proceeding.
Fill or Line Engraving
Choose fill engraving to fill the interior of identified shapes, or line to simply trace the outline. Each method offers different visual rendering according to your needs.
Your part, your choices, your price.
Configure one part or a series. See your price and lead time before ordering.
No account needed for pricing · Free shipping from $49